Washing machine
Front load Washing
Machine
Visiting charges: Just Rs.249/- only.
Installation/un-Installation: Just Rs. 399/- Only.
Service charge Just Rs. 399/-(Including Visiting Charges After problem Solved)
Prices shown are for service/labor charges only.
Spare part(s) cost extra.
90 Days Warranty on Post Service. Book Your Service.
Top Load Washing
Machine
Visiting charges: Just Rs.249/- only.
Installation/un-Installation: Just Rs. 399/- Only.
Service charge Just Rs. 399/-(Including Visiting Charges After problem Solved)
Prices shown are for service/labor charges only.
Spare part(s) cost extra.
90 Days Warranty on Post Service. Book Your Service.
Top Load Manual Washing Machine
Visiting charges: Just Rs.249/- only.
Installation/un-Installation: Just Rs. 399/- Only.
Service charge Just Rs. 399/-(Including Visiting Charges After problem Solved)
Prices shown are for service/labor charges only.
Spare part(s) cost extra.
90 Days Warranty on Post Service. Book Your Service.
Sno | spare part cost | rate/price | service charge |
---|---|---|---|
1 | inlet pipe | 400 | 399 |
2 | inlet pipe adaptor | 200 | 399 |
3 | sinle inlet valve | 930 | 399 |
4 | double inlet valve | 1380 | 399 |
5 | triple inlet valve | 1780 | 399 |
6 | pressure sensor | 950 | 399 |
7 | pressure sensor pipe | 150 | 399 |
8 | noice filter | 600 | 399 |
9 | cord wire | 450 | 399 |
10 | LVT | 750 | 399 |
11 | pulley | 1100 | 399 |
12 | belt | 920 | 399 |
13 | main wash motor | 5800 | 399 |
14 | main wash motor inverter | 6000 | 399 |
15 | dampers | 1100 | 399 |
16 | bearings with chemical wash | 4600 | 399 |
17 | drum with chemical wash | 5800 | 399 |
18 | hub with chemical wash | 5800 | 399 |
19 | chemical wash | 2800 | – |
20 | pcb repair non inverter | 2100 | 399 |
21 | pcb repair inverter | 2900 | 399 |
22 | replace pcb | actual price | 399 |
23 | gasket | 2200 | 399 |
24 | rewiring | 600 | – |
25 | drain motor | 2200 | 399 |
26 | double drain motor | 2800 | 399 |
27 | door lock | 1100 | 399 |
28 | timer | 2400 | 399 |
29 | mcu | 1600 | 399 |
30 | drain pipe | 200 | 399 |
31 | hall sensor | 1550 | 399 |
Sno | spare part cost | rate/price | service charge |
---|---|---|---|
31 | inlet pipe | 400 | 399 |
32 | inlet pipe adaptor | 200 | 399 |
33 | sinle inlet valve | 930 | 399 |
34 | double inlet valve | 1380 | 399 |
35 | triple inlet valve | 1780 | 399 |
36 | pressure sensor | 950 | 399 |
37 | pressure sensor pipe | 150 | 399 |
38 | noice filter | 600 | 399 |
39 | cord wire | 450 | 399 |
40 | LVT | 750 | 399 |
41 | long inlet valve | 1380 | 399 |
42 | belt | 550 | 399 |
43 | main wash motor | 4000 | 399 |
44 | main wash motor inverter | 4500 | 399 |
45 | dampers/ shocker set | 1600 | 399 |
46 | clutch assembly | 3800 | 399 |
47 | drum with chemical wash | 4500 | 399 |
48 | tub with chemical wash | 3900 | 399 |
49 | chemical wash | 2500 | – |
50 | pcb repair | 1900 | 399 |
51 | pcb repair inverter | 2300 | 399 |
52 | replace pcb | actual price | 399 |
53 | wiring | 1500 | 399 |
54 | rewiring | 600 | – |
55 | drain motor | 1300 | 399 |
56 | drain bellow assembly | 700 | 399 |
57 | door switch | 450 | 399 |
58 | Dc inlet valve 3/4 | 1950 | 399 |
59 | Dc inlet valve | 1380 | 399 |
60 | magic filter | 350 | 399 |
61 | door lid | 350 | 399 |
62 | drain pipe | 200 | 399 |
63 | pulsator | 1400 | 399 |
64 | capacitor | 500 | 399 |
s no | spare part cost | rate/price | service charge |
---|---|---|---|
65 | inlet pipe | 200 | 399 |
66 | drain pipe | 200 | 399 |
67 | timer 7wire | 800 | 399 |
68 | timer 6wire | 750 | 399 |
69 | timer 4wire | 700 | 399 |
70 | spin timer | 600 | 399 |
71 | buzzer | 350 | 399 |
72 | selector switch | 450 | 399 |
73 | drain thread | 250 | 399 |
74 | drain bellow | 350 | 399 |
75 | pulsator | 1100 | 399 |
76 | gearbox | 1200 | 399 |
77 | belt | 350 | 399 |
78 | wash motor | 1900 | 399 |
79 | spin motor | 1800 | 399 |
80 | buffer | 450 | 399 |
81 | spin lid | 300 | 399 |
82 | spin tub | 1500 | 399 |
83 | rewiring | 600 | – |
84 | CAPACITOR | 600 | 399 |
- 90 days warranty is given from our behalf
- Finish your work within 72 hours of maximum
- Service/labor charges is only 399/-
- Spare parts used by our experts are 100% genuine
- You can check the condition of your machine, before paying the money
- Do not forget to take the bill after completion of work
- Ask our expert to clarify all of the doubts you have
- You can ask about the precautions to give your machine a good service
- You should ask the expert how much it will cost after the inspection
- If you don’t want service after inspection, you will have to pay a minimum of visiting charges 249/-only.
- Cheque, credit and debit cards are not accepted.
- Once you have charged for spare part(s), will not be refunded
- You may contact the phone number shown above when any problems arise from our expert
- It is not our responsibility to do things that are not experted by us
- The bill copy should be carefully preserved for 90 days
- You have to pay for spare parts when you have to do a different job at the time of warranty.
- It takes 24 to 48 hours for arrange same expert to you, during warranty period.
- Our parts will only change when we have to change spare parts. We are not -responsible for your spare parts.
- Give some time to our expert to find out what the problem of your machine is.
- After the warranty time, no warranty can be issued from our side.
- We will not be responsible for any previous physical damages.
- Water not embeddings into the drum
- Ware gradually embeddings into drum
- Surf/Cleanser isn’t going
- Water ceaselessly embeddings into drum without getting cutoff
- Water straightforwardly embeddings into the drum
- Spinning time water embeddings into the drum
- Rinsing time softner isn’t going
- Wash not completely stops the machine
- Clothes doesn’t washing appropriately
- Drum turning overwhelming at the time of washing
- Drum turning gradually at the hour of turning
- Clothes were harming
- Clothes getting mud subsequent to washing finishes
- After finishes the wash cycle garments doesn’t dry
- Heavy sound from drum
- Drum was not rotating center of the wash cycle
- Drum/Tub braked
- Water not depleting
- Water depleting persistently
- Water depleting gradually
- Water depleting at the time of middle of washing
- Water not draining at time of spinning
- Machine not getting power on
- Machine constantly running without stops
- Pcb not sending power supply to the water valve
- Pcb not sending power supply to the mail motor
- Pcb not sending power supply to the drain motor
- Pcb not sending power supply to the heating element
- Spin tub issue for manual machines
- Rat nibbles related issues and so on…
- Pcb not sending power supply to the door lock
- Pcb not sending power supply to the sensors
- Display squinting constantly/mostly
- Pcb sending power supply to the water valve legitimately/constantly
- Pcb sending power supply to the main motor straightforwardly/constantly
- Pcb sending power supply to the fundamental/wash engine legitimately/persistently
- Lvt (low voltage transformer) disappointment
- Fuse disappointment
- Door sensor disappointment for top load
- Internal issues in PCB, like capacitor,relay and so forth…
- Door not locking
- Door not opening
- Water spillage from the door
- Machine vibrates vigorously
- Water not warming
- Water breaks from the base of the drum
- Timer issues for manual machines
- Spin engine issue for self-loader/manual machines
- Gear/grip get together/component issue
- Tub issue for automatic machines
Today, we live on a busy schedule where we run short of time. In this most advanced world, Technology is the boom for all of us to save time.
Having a washing machine will help users to work for different activities in your home. It is the source of convenience and saves time to wash your clothes. However, all the electronic and electrical equipment will get minor issues while using it. So, Washing machine repair and proper maintenance are always suggested by an expert.
When you notice any problem with the washing machine, you should immediately look for the right service to repair and service your washing machine frequently.
- What are charges for repair?
- Which quality of spare parts will use by Divyasri Solutions?
- Who will bring the spare parts when customers required?
- How Divyasri Solutions will provide warranty to customer’s product?
- If customer paid only visiting charges what is warranty time?
- Who is service expert and how can customer believe?
Divyasri Solutions will charge Rs.399/- maximum for service/labour charges. Incase spare part(s) needed, customer needs to be bare spare part(s) charges.
Divyasri Solutions will provide 100% genuine spare parts to our customers.
Divyasri Solutions’s experts will bring the spare parts to customer’s doorstep.
Divyasri Solutions is providing 3 types of warranty to the customers.
-> 90 days warranty on repair
-> 90 days warranty on General service, spare(s) and Installation
-> 30 days warranty on visiting charges.
If customer paid only visiting charges, this will be applicable under 30 days warranty period.
Him/her. Service expert is a partner of Divyasri Solutions and Service expert is not permanent employee of Divyasri Solutions. However, Divyasri Solutions will check all background verification and trusted.